Butterfly Valve 1,5" Tri-Clamp with Trigger Handle

Stainless Steel 1.5" Tri-Clamp butterfly valve with blue squeeze trigger handle. The handle has a toothed lock ring which holds the handle in place until the level is squeezed to allow opening and closing.

If you are connecting a butterfly valve directly to a Craft Hardware kettle, I recommend the DN40 version of this product, which exactly matches the slightly larger inside diameter of the DN40 nozzles used on our kettles. 

• Valve body length 70mm
• Inner diameter 34,8mm
• Tri-Clamp size 50.5 mm = 1.5"
• The valve body protrudes approx. 42 mm below the centerline of the Tri-Clamp connection
• Stainless steel 1.4301
• Silicone seal rated to 140℃

Butterfly valves are not recommended where flow restriction is important, for example when lautering or restricting pump flow.

The 1.5" and DN40 butterfly valves use the same size replacement silicone gasket.