Ball Valve 3-Way L-bore Tri-Clamp DN 15 (34 mm)

This 3-way ball valve is L-drilled and the ball rotates 360 degrees allowing 3 operating positions. Please make sure the available positions are suitable for your application. Typically with an L valve the fluid entrance would be the middle leg, with the exit on either side. Make sure you have enough clearance to rotate the handle all the way around; some fittings may obstruct and prevent normal operation. 

Specifications:

• Length 96 mm
• Inner Diameter 16 mm (Nominal DN 15)
• Tri-Clamp Size 34 mm
• Wrench Size: 19 mm
• Gaskets: PTFE

The valve can, and should, be disassembled for cleaning. For initial disassembly you will want to use two wrenches, or place the valve in a vise. Re-tighten it with a wrench when reassembling, to prevent unwanted leaking by accidentally rotating of the attached fittings. The wrench flats are 19 mm. I recommend regular cleaning of your ball valves, even when used only on the hot side of your brewery.